High Frequency Welded Solid Finned Tube As Per ASTM A192
- ASTM A192 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A192/ASME SA192 specifies minimum wall thickness, seamless carbon steel boilers, and superheater tubes for high-pressure use. The steel must meet the chemical composition requirements for carbon, manganese, phosphorus, sulfur, and silicon. The hardness number of the tubes must not exceed a certain value. Mechanical tests, including flattening, flaring, hardness, and hydrostatic testing, must be performed.
The tubing sizes and thicknesses specified by ASTM A192/ASME SA192 are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Other dimensions of tubing may be supplied, provided they meet all other requirements of this specification.
Specification of ASTM A192 High Frequency Welded Solid Finned Tube
| Product Name | ASTM A192 High Frequency Welded Solid Finned Tube | ||
| Tube Dimensions | Fin Dimensions | ||
| Standard | ASTM A192/ASME SA192 | Welded Type | HFW (High Frequency Welded) |
| Material | Carbon Steel | Fin Type | Solid |
| Type | Seamless | Fin Material | Carbon Steel |
| Outside Diameter | 31.8mm | Fin Thickness | 0.8mm |
| Wall Thickness | 2.9mm | Fin Height | 12mm |
| Length | 1750mm | Fin Pitch | 234 FPM |
| Bare End | 50mm+500mm | ||
| Payment Terms | T/T, L/C | ||
| Delivery Time | As per quantity required | ||
Chemical Composition (%) of ASTM A192 High Frequency Welded Solid Finned Tube
| CHEMICAL COMPOSITION (%) | |||||
| Standard | C, max | Mn | P, max | S, max | Si, max |
| ASTM A192/ASME SA192 | 0.06-0.18 | 0.27-0.63 | 0.035 | 0.035 | 0.25 |
Mechanical Properties of ASTM A192 High Frequency Welded Solid Finned Tube
| MECHANICAL PROPERTIES | |||||
| Standard | Tensile strength, MPa, min | Yield strength, MPa, min | Elongation (%), min | Hardness, max | |
| ASTM A192/ASME SA192 | 325 | 180 | 35 | 77 HRB | 137 HB |
TS can provide custom-finned tubes for our customers. The base tube material of our finned tubes can be carbon steel, stainless steel, nickel-based alloy, etc. The fins can be made of carbon steel, aluminum, stainless steel, etc.
We would appreciate receiving a complete inquiry containing the following information in order to forward you a prompt offer:
- Base tube material and quantity
- Base tube size
- Fin material
- Fin type
- Fin diameter or height
- Fin thickness
- Fins per inch, meter, or fin pitch
- Length of plain, unfinned ends
(Necessary to roll or weld the tubes into tubeplate or assembly)